We can offer various pump types for diesel:
- Vane pumps (Panther, Viscomat, E-series, E3000 series, BI100, EX series)
- Up to 90 l/min, up to 6 bar
- Wide selection of AC and DC pumps
- Some models equipped with bypass valve
Vane pumps
- Impeller pumps (UNISTAR)
- Up to 90 l/min, up to 5 bar
- Bidirectional operation possible
- Very good suction properties
- Solids can be conveyed along with the fluid
Impeller pumps
- Centrifugal pumps (E300)
- Up to 550 l/min
Centrifugal pumps
- Up to 550 l/min
Model series at a glance
Panther-Series
Models 56 | 72 | 90
The Panther series comprises compact vane pumps with high throughput for diesel and clean heating oil.
Ideal for dispensing systems, workshops, or gas station applications.
Flow rate:
35–90 l/min at 2,900 rpm
Delivery pressure:
up to 2 bar
- 500 μm filter & integrated lift protection device
- Built-in pressure relief valve (bypass)
- Panther 72 model also available for BIO-Diesel
Viscomat-Series
Viscomat 70 | 90 for Diesel and oils
Vane pumps from the Viscomat series are suitable for clean oils and Diesel with a viscosity of up to 500 cSt (e.g., heating oil, vegetable oil, motor oil) and a maximum media temperature of 60 °C.
Flow rate:
25–50 l/min at 1,450 rpm
Delivery pressure:
up to 6 bar
- Specially designed blades for oils
- Low-noise operation (<70 dB)
- Delivery head: up to 4 m with foot valve
- Integrated flow valve for volume control (except VISCOMAT 90-m)
E-Series
Models 80 | E 120 | E140
The E series offers powerful vane pumps for diesel with DC or AC motors for demanding transfer tasks, e.g., in industrial applications, tank transfers, refueling machines on construction sites, or in agriculture.
Flow rate:
30–140 l/min at 1,150–1,450 rpm
Deliery pressure:
up to 2,8 bar
- Built-in pressure relief valve (bypass)
- Model E 120 also available for biodiesel
E 3000-Series
E 3000 | Carry E 3000
The E 3000 series offers powerful vane pumps for diesel fuel with a DC motor. The compact size of the 12 V | 24 V pumps makes them very compact, allowing for mobile and flexible use. The pumps from the E 3000 series can be used to reliably and safely refuel construction machinery, trucks, and cars (e.g., also from mobile tanks).
Flow rate:
30–50 l/min at 1,500–2,900 rpm
Delivery pressure:
1,5 bar
- Built-in pressure relief valve (bypass)
- Optionally available with horizontal or vertical connections
- Also available for biodiesel, as a refueling box, or as a barrel pump
- Maximum duty cycle 30 min
BI 100-Series
for diesel
The BI 100 series vane pumps for DC operation are ideal for mobile and self-sufficient use on construction sites or in agriculture.
Flow rate:
85 l/min
Delivery pressure:
1,2 bar
- Self-priming vane pump
- for direct and fast diesel refueling on site
- Maximum operating time 30 min
Impeller pump
UNISTAR impeller pump
The dry self-priming impeller pumps can empty drums down to the last drop. Thanks to their flexible impeller, the pumps are insensitive to solids in the medium and are therefore particularly suitable for pumping waste oils and contaminated fuels.
- Extracting waste oil from engines and gearboxes
- Extracting cooling lubricants
- Maintaining machines
- Emptying heating oil and diesel tanks
- Optional dry-running protection
EX series (ATEX for gasoline and diesel)
for gasoline, E15, diesel, kerosene, ASPEN 2/4, AVGAS100/110LL, JET A/A1
The gasoline pumps meet the strict specific criteria of the ATEX/IECEx directive for product safety in Europe (II 2 G Ex d IIA T4 Gb) and are suitable for pumping gasoline and E15, kerosene, diesel or ASPEN 2/4, as well as AVGAS100/110LL and JET A/A1.
The EX 50 to EX 140 models with a 230 V power supply are available for stationary installation. The EX 50 and EX 75 models are also available in a 12 V version.
The EX GO! is the compact and mobile version of the EX series. The 12 V pump is equipped with a cable and clamps and is therefore ready for immediate use. Thanks to its small dimensions, it is easy to transport and position. This means that nothing stands in the way of off-road use, whether with cars, trucks, construction machinery, boats, small aircraft, or off-road vehicles!
Flow rate:
32–140 l/min
Delivery pressure:
- up to 2 bar
- Robust and compact design
- Cast iron housing
- On/off switch
- Anti-noise filter (electromagnetic compatibility EMC)
- Built-in bypass valve
- Thermal circuit breaker
E300
The powerful transfer pump
- Pump with open impeller
- Self-priming
- Integrated check valve
- Up to 550 l/min
