VELO UP - a low intake pump for indoor and outdoor applications
Electronic pump drainage with vertical adjustable (automatic or manual) with removable filter for suction up to 2/3 mm. The adjustment slider of the probes, allows you to vary the level of on-off of the pump, this feature increases the versatility of installation.
The vertical delivery and the electronic float make it a pump suitable for use in wells of small dimensions. Thermal-amperometersc protection incorporated and condenser permanently connected
Application
from 1 to 15 m3/h-with prevalence up to 10 meters.
- from 0° C to +35° C for domestic use
- maximum immersion depth: 7 m
- minimum depth of draft: 60 mm
- maximum containing solids: 10 mm
Features
- motor, rotor shaft and screws in stainless steel
- triple O-ring seal with interposed oil chamber
- stator in a sealed stainless steel enclosure
- asynchronous submersible motor for continuous operation
Characteristic curves
VELO UP 300, 230 V Submersible Waste Water Pump
Art. Nr. 165300
Submersible Waste Water Pump flow rate max. litres 150 l/min flow rate max. m³ 9 m³/h max. pressure 0,8 bar Outlet 1 ¼“ Impeller type Technopolymer Free passage max. 10 mm, max. fluid temperature 35°C Max. depth 7 m Material pump housing Technopolymer Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,21 kW, Rated current (AC) 1,5 A Material motorshaft stainless steel Protection class IP68 , Operating mode S1, Isolationclass F Motor protection (thermal) yes 10 m cable with plug frame size 297 x 160 mm (width including float switch unit ca. 220 mm) weight 5,8 kg Adjustable slides to select switch on point (min.105 mm, max. 255 mm) For automatical or manual use. With removable filter (for suction down to 2-3mm)
VELO UP 600, 230 V Submersible Waste Water Pump
Art. Nr. 165600
Submersible Waste Water Pump flow rate max. litres 225 l/min flow rate max. m³ 13,5 m³/h max. pressure 1 bar Outlet 1 ¼“ Impeller type Technopolymer Free passage max. 10 mm, max. fluid temperature 35°C Max. depth 7 m Material pump housing Technopolymer Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,52 kW, Rated current (AC) 3,5 A Material motorshaft stainless steel Protection class IP68 , Operating mode S1, Isolationclass F Motor protection (thermal) yes 10 m cable with plug frame size 324 x 160 mm (width including float switch unit ca. 220 mm) weight 7,3 kg Adjustable slides to select switch on point (min.140, max. 290mm) For automatical or manual use. With removable filter (for suction down to 2-3mm)
Data, Information, Pictures, Descriptions and Dimensions on the complete site are non-binding and follow only the purpose of visualization. All prices are without VAT, packing and transport.
